Commercial · Ocala, FL
When you need concrete demolition done cleanly and safely, the planning matters as much as the breaking. Ocala Concreters has served Ocala since 2015, removing slabs, driveways, patios, pool decks, and footings with controlled demolition and careful haul-off.
We start by confirming scope, access, and what has to stay, then mark utilities and plan protection for siding, doors, and landscaping. Crews isolate the work area with dust control and debris barriers, then choose the right equipment for the slab thickness and reinforcement, such as electric jackhammers, skid steers with breaker attachments, and concrete saws for straight control cuts. If you are replacing concrete, we verify grades, drainage, and base requirements up front so the removal supports the next step. After breaking and loading, we scrape down to firm subgrade and identify soft spots that need undercutting before any new base goes in.
North Central Florida soils and frequent rain can expose unstable subgrade once the slab is out, so we watch for pumping, clay pockets, and washouts along edges. For replacements, we typically re-establish a compacted base with DOT-grade limerock or crushed concrete (recycled base) in lifts, compacted with a plate compactor to reduce settling. We also address drainage by resetting slope away from the structure and keeping joints and edges where water will not trap. When demolition ties into existing concrete, we leave clean, saw-cut edges so the new pour can be doweled or keyed properly and finished to match, whether broom-finish, light trowel, or exposed aggregate.
Customers choose us because our concrete demolition is organized, not chaotic, with clear cut lines, controlled break patterns, and thorough cleanup. We show up with the right tools for the job, from walk-behind saws and core drills for selective removal to skid steer loaders and dump trailers for efficient haul-off. You get straightforward communication on what is staying, what is being removed, and what the site will look like when we are done, including options for recycling concrete when feasible. As a licensed and insured contractor, we focus on jobsite safety, protecting adjacent surfaces, and keeping your driveway access and business entrances as workable as possible during the work.
At the end, we do a walkthrough to confirm boundaries, elevations, and that all debris is removed, including wire mesh, rebar, and broken edge pieces. The final deliverable can be demolition only, or a ready-to-build pad that is scraped, proof-rolled as needed, and compacted to accept base and forms. We can stage the area for the next trade, leave clean saw-cut joints for tie-ins, and coordinate disposal receipts when requested. You are left with a clean site, a clear plan for the replacement, and a written scope that matches what was completed.
Yes. We provide a free written estimate after an on-site evaluation so we can verify measurements, access, grade, and tie-ins.
Yes. We handle demo, breaking, loading, and haul-off, then regrade and compact the base before forming and pouring.
In most cases, yes. We can match common textures like broom-finish and smooth trowel, and we can discuss decorative options such as light stamp patterns where appropriate.
If your project requires a permit, we will explain what applies and coordinate the concrete scope to meet local requirements for thickness, reinforcement, and setbacks.
We will review payment terms in the written estimate, including deposit requirements and final payment timing after completion and walkthrough.
Concrete demolition is more than breaking up a slab. The right approach protects nearby structures, controls dust and debris, and leaves a stable subgrade so your replacement driveway, patio, sidewalk, or building pad performs the way it should. Ocala Concreters handles full and selective concrete removal, including saw-cut demolition for clean edges, reinforced concrete tear-out, and haul-off and disposal. Whether you are dealing with heaved panels, trip hazards, or concrete that failed from poor base compaction, we plan the job to remove what is needed and prepare the site for what comes next.
Our process starts with access and safety: utility locating, protection for doors and windows, and a plan for traffic flow if the work affects a driveway or storefront. We match tools to the slab, using walk-behind concrete saws for perimeter cuts, jackhammers for tight areas, and skid steer breakers and loaders for efficient production. For selective demolition, we cut to limits first so surrounding concrete and adjacent finishes are not damaged. Reinforced slabs are separated into manageable sections, steel is removed, and the area is cleaned down to subgrade.
After removal, we evaluate the base and soil conditions. Concrete failures often trace back to soft subgrade, trapped water, or inadequate base thickness, so we identify undercut areas and re-establish grade if a replacement is planned. We can install compacted limerock or crushed concrete base in lifts and verify slope for drainage before forming begins. If your project stops at demolition, you still get a tidy site without loose rubble, exposed steel, or jagged edges.
If you need concrete demolition in Ocala, tell us what you are removing and what is going back in, and we will propose a plan that fits your schedule and budget. You will receive a clear written estimate, a defined scope of work, and a cleanup standard that leaves the property usable. When you are ready, we can transition directly from removal into new concrete installation so the entire project stays coordinated from start to finish.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Ocala. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
